FIAlab's novel ammonia/TKN method receives full EPA authorized status!
Read MoreThe Ion Selective Electrode (ISE) flow cell is designed to accommodate various ion selective combination electrodes. One example is the sympHony™ Fluoride Ion Selective Combination Electrode produced by VWR. More generally, the standard ISE flow cell will accommodate any combination electrode with a 1/2 inch diameter. Other sizes are available (e.g., 12 mm), upon request.
Simply plug your electrodes into the flow cell ports, set up an electrical gradient and then take absorbance measurements as normal
Part # |
Description |
79010 |
Plexiglass Flow Cell for Combination Ion Selective Electrode |
79011 |
Ultem Flow Cell for Combination Ion Selective Electrode |
The small internal volume of this flow cell ( 200 microlitres), allows ISE electrodes to be coupled with both flow injection and sequential injection analyzers.
ISE based assays include ammonia, fluoride, chloride, bromide, nitrate, calcium and potassium.
ISE flow cells are now used for performing quality control on 3M filters.
Product
Type: Flow cell for ion-selective electrode
Body material: Plexiglas or Ultem
Required ISE type: 0.5 in diameter flat-bottom electrode
Fluidics
Wetted materials: Body material (Plexiglas or Ultem), PTFE
Chamber volume: 85 µL
Fluidic port type: Flat-bottom ¼-28
Environmental requirements
Operating temp: +5 °C to +100 °C
Dimensions
Height: 2.5 in (6.4 cm)
Width: 1.5 in (3.8 cm)
Depth: 0.75 in (1.9 cm)
Weight: 2.0 oz (57 g)
If you would like more information or a quote of our products, please email: sales@flowinjection.com Or, call us at 206-258-2290. One of our expert sales staff will be sure to help you.